Wash Water Recycling and Recovery

RPT5E1 High Volume Vac

Transfer System Wet / Dry Recover & pump out up to 35 GPM to 100' away. Perfect for high-volume pickup and discharge - use for flood recovery, fire restoration, recovery of wash water or as a high powered shop / detail vacuum. Includes 2-stage 97CFM / 93" lift vacuum & 35' GFCI cord. Use with our ANTV3 Twister Vac for wash / recovery application or install filter and use as a high-powered shop vac. Requires 2" vacuum hose & 1" discharge hose to achieve maximum performance. This is a recovery system, not filtration system. Shown with optional wheel kit, surface cleaner and hose. Ask about our accessory kit
Power Requirements: 3500W generator or 120 VAC/15A outlet.

RPVRE1 Portable Vacuum Filtration System

This portable vacuum recovery system helps protect the environment by eliminating wash water run off and complies with EPA / governmental storm drain regulations. It is a self-contained closed loop system with zero discharge and pretreatment for solids and hydrocarbon absorption. Processes up to 8 gallons per minute and includes sand dam barriers and pickup scupper. The sealed vacuum is a powerful 2-stage unit with an appetite of 102 CFM. The 115 VAC transfer pump sends water through the filters resulting in a 20 Micron polish and pumps it up to 200' away. The 2" industrial ribbed vacuum hose is 50' long. Requires 115VAC / 15A outlet or 3500 Watt generator.

RZVE1 Filtration System 5.0 GPM

A perfect tool for recycle / reuse on large amounts of flatwork. Complete with oil skimmer bag, quick dump / solids drain & a filter service indicator gauge. This unit can interface with our ANTV3 vac twister resulting in a closed-loop system. Includes 50' x 2" Vacuum hose, scupper and containment berms. Water is vacuumed-up and filtered through 7 stages to 5 micron and returned to the customers storage tank for reuse. Rated for 5.0 GPM / 104 CFM and 91" lift.
Power Requirements: 3500W generator or 120 VAC/15A outlet

RZV10E1 Filtration System 8.0 GPM
All the same features of the RZVE1 but rated for up to 8.0 GPM

RPFE1 Process Filtration System 6.0 GPM

RPFE1 Process Filtration System 6.0 GPM
A full size Recycle System that is compact enough to fit in the bed of a full size pickup truck for delivery or demo. Designed as an addition to the customers wash pad, the 6-stage filtration process includes a 3-tank oil-water-solids separation system, oil coalescing, multi-stage filtering process & on-demand water delivery system with chlorine injection & a 185 gallon cleaned-water storage tank. Maintenance is simple, just clean or change the cartridges as indicated by the pressure gauge, saving you time & money. Requires 115 VAC / 20A.

• Process 6.0 GPM to 5 micron.
• Compact & Simple to Install
  • Plug into 20A outlet, connect hoses to integrated storage tank, power on & use.
• Simple to Operate: Includes automatic pump controls, low water shut-off switch & replenishment.
• Optional sump pump available # PS106